Prediction of Deformation Behavior of Metallic Foams Using a Yield Criterion for Compressible Materials
-
- Kim Woo-Young
- Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University
-
- Matsumoto Ryo
- Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University
-
- Utsunomiya Hiroshi
- Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University
Search this article
Abstract
<p>Deformation behavior of metallic foams is complicated due to changes in bulk density and volume during deformation. In the previous studies, repeated compression tests were conducted with cylindrical specimens of open-cell type nickel foam and closed-cell type aluminum foam to investigate changes in density and dimensional change. In this study, Oyane’s yield criterion which was originally developed for powder sintered materials and the associated flow rule were used to describe the deformation behavior of the metallic foams with consideration of changes in density, i.e., volumetric strain. The material constants in Oyane’s equation were determined for the two metallic foams based on the experimental results. The obtained constants were a = 2.12 and m = 0.3 for the both foams. Deformation behavior in uniaxial compression is successfully reproduced with the obtained material constants.</p>
Journal
-
- MATERIALS TRANSACTIONS
-
MATERIALS TRANSACTIONS 59 (12), 1892-1897, 2018-12-01
The Japan Institute of Metals and Materials
- Tweet
Details
-
- CRID
- 1390001288094711552
-
- NII Article ID
- 130007521309
-
- NII Book ID
- AA1151294X
-
- ISSN
- 13475320
- 13459678
-
- NDL BIB ID
- 029374112
-
- Text Lang
- en
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed