Prediction of Deformation Behavior of Metallic Foams Using a Yield Criterion for Compressible Materials

  • Kim Woo-Young
    Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University
  • Matsumoto Ryo
    Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University
  • Utsunomiya Hiroshi
    Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University

この論文をさがす

抄録

<p>Deformation behavior of metallic foams is complicated due to changes in bulk density and volume during deformation. In the previous studies, repeated compression tests were conducted with cylindrical specimens of open-cell type nickel foam and closed-cell type aluminum foam to investigate changes in density and dimensional change. In this study, Oyane’s yield criterion which was originally developed for powder sintered materials and the associated flow rule were used to describe the deformation behavior of the metallic foams with consideration of changes in density, i.e., volumetric strain. The material constants in Oyane’s equation were determined for the two metallic foams based on the experimental results. The obtained constants were a = 2.12 and m = 0.3 for the both foams. Deformation behavior in uniaxial compression is successfully reproduced with the obtained material constants.</p>

収録刊行物

  • MATERIALS TRANSACTIONS

    MATERIALS TRANSACTIONS 59 (12), 1892-1897, 2018-12-01

    公益社団法人 日本金属学会

参考文献 (12)*注記

もっと見る

詳細情報

問題の指摘

ページトップへ