<i>β</i>型チタン合金Ti-22V-4Alにおける変形・破壊挙動の温度依存性

DOI Web Site 参考文献47件 オープンアクセス
  • 矢野 伶
    九州大学大学院工学府材料工学専攻 大学院生
  • 田中 將己
    九州大学大学院工学研究院材料工学部門
  • 山﨑 重人
    九州大学大学院工学研究院材料工学部門
  • 森川 龍哉
    九州大学大学院工学研究院材料工学部門
  • 都留 智仁
    国立研究開発法人日本原子力研究開発機構 原子力基礎工学研究センター

書誌事項

タイトル別名
  • Temperature dependence of deformation and fracture in a beta titanium alloy of Ti-22V-4Al

説明

<p>Impact tests and tensile tests were conducted between 77 K and 450 K in order to elucidate the temperature dependence of absorbed-impact energy, yield stress, effective shear stress, activation volume, and activation enthalpy. The impact-absorbed energy decreased with decreasing test temperature, however, this alloy did not undergo low-temperature embrittlement although it has a bcc structure. Tensile tests showed changes in both the work-hardening rate and the temperature dependence of yield stress at approximately 150 K. This suggests a change in the mechanism behind the plastic deformation at the temperature. The temperature dependence of the activation enthalpy for dislocation glide suggests that the process of climbing over the Peierls potential (kink-pair nucleation) is the dominant mechanism for the dislocation glide from 150 K to 200 K, while the interaction between a dislocation and solute atoms dominantly controls the dislocation glide above 200 K. Superelasticity appears in stress-strain curves tested below 120 K, suggesting that the yielding is governed by transformation-induced plasticity below 120 K. The enhanced toughness at low temperatures in these alloys is discussed from the viewpoint of dislocation shielding theory.</p>

収録刊行物

  • 軽金属

    軽金属 73 (10), 497-503, 2023-10-15

    一般社団法人 軽金属学会

参考文献 (47)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ