Feature-size Control by Pattern Transfer Etching in Nanoimprint Lithography for Half-pitch 24 nm Damascene Interconnect

DOI Web Site Web Site 参考文献12件

この論文をさがす

説明

<p>Nanoimprint lithography (NIL) is a promising technique for fabricating dual damascene structures commonly fabricated in back-end-of-line layers. The feature size must be controlled for forming good open/short interconnects in damascene processes. In this work, we controlled the feature size by pattern transfer etching in NIL for half-pitch (HP) 24 nm damascene interconnects. By changing the conditions when transferring patterns etched in NIL to spin-on-carbon layers, the wiring dimensions were changed by approximately 5 nm for a HP 24 nm. A test pattern was fabricated by depositing tungsten, followed by chemical mechanical polishing. The electrical characteristics of test devices were subsequently evaluated using the open/short test element group. We widened the process window for fabricating damascene interconnects by varying the linewidth to control the feature size in pattern transfer etching.</p>

収録刊行物

参考文献 (12)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ