Development of Flexible Piezoelectric Strain Sensor Array

DOI Web Site Web Site 5 References
  • Yamashita Takahiro
    Research Center for Ubiquitous MEMS and Micro Engineering, National Institute of Advanced Industrial Science and Technology
  • Takamatsu Seiichi
    Graduate School of Frontier Sciences, The University of Tokyo
  • Okada Hironao
    Research Center for Ubiquitous MEMS and Micro Engineering, National Institute of Advanced Industrial Science and Technology
  • Itoh Toshihiro
    Graduate School of Frontier Sciences, The University of Tokyo NMEMS Technology Research Organization
  • Kobayashi Takeshi
    Research Center for Ubiquitous MEMS and Micro Engineering, National Institute of Advanced Industrial Science and Technology

Bibliographic Information

Other Title
  • 極薄圧電ひずみセンサを用いたフレキシブルセンサアレイシートの開発
  • ゴクウス アツデンヒズミ センサ オ モチイタ フレキシブルセンサアレイシート ノ カイハツ

Search this article

Description

<p>In this paper, we present a novel flexible sensor array manufacturing process that involves transfer printing methods using a chip mounter with a vacuum collet. We successfully transfer-printed continuously very fragile microelectromechanical systems (MEMS)-based 5-mm-long, 1-mm-wide, 5-µm-thick high-aspect-ratio ultra-thin PZT(1.9µm)/Si(3µm) strain sensors onto a polyimide based flexible printed-circuit (FPC) substrate with etched Cu wiring. Then, we connected the sensors to the Cu wiring by printing insulating and conductive pastes using a screen printer. The output voltage based on the deformation behavior of the test plate was generated from the flexible piezoelectric strain sensor array attached to the plate. Therefore, the developed piezoelectric sensor array is capable of easily performing the distribution measurement of the strain leading to damage such as cracks.</p>

Journal

References(5)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top