書誌事項
- タイトル別名
-
- Development of a High-Speed and High-Accuracy Measurement System for Micro Edge Radius of Long Precision Tool
- チョウシャク コウグ マイクロ エッジ ハンケイ ノ コウセイド コウソク ケイソク システム ノ カイハツ
この論文をさがす
抄録
This paper describes a measurement system for the edge radius of a long precision tool. A line-CCD camera is employed to scan the tool edge over the entire tool length. The edge width of the tool at each scanning point is first evaluated from the image of the line-CCD camera. The edge radius is then calculated from the edge width based on the calibration results using pin gauges. A multi-line scanning method is proposed to reduce the defocus errors caused by the out-of-straightness error of the scanning stage. Experimental results have shown that the edge radii over the entire length of a 5100 mm long tool can be evaluated in 30 minutes.
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 73 (7), 823-827, 2007
公益社団法人 精密工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679772621056
-
- NII論文ID
- 110006342952
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
-
- NDL書誌ID
- 8890607
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可