アルミニウムの塑性変形と最大せん断応力説

DOI DOI Web Site Web Site Web Site

書誌事項

タイトル別名
  • Theory of Maximum Shearing Stress and Plastic Deformation of Aluminium
  • アルミニウム ノ ソセイ ヘンケイ ト サイダイ センダン オウリョクセツ

この論文をさがす

説明

The theory of plasticity based on the maximum shearing stress in the triaxial plastic deformations of metals is established using the experimental results as to the work-hardening properties of aluminium by pure shear and on the following assumptions. The slips, or the pure shearing plastic strains, in the directions of the three principal shearing stresses, constitute the plastic deformation of metals. And the increments of these slips are proportional to the shearing stresses in these directions. It can be shown by previous experimental results, that the theory is more useful for the calculation of the plastic deformations of aluminium as compared with the octahedral shearing stress theory.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ