回転噴孔による液体の微粒化 : 第7報, 油バーナへの応用

DOI Web Site Web Site

書誌事項

タイトル別名
  • Atomization of Liquids by Means of a Rotating Nozzle : 7th Report, Application to the Oil Burner
  • カイテンフンコウ ニ ヨル エキタイ ノ ビリュウカ 7

この論文をさがす

抄録

An oil burner of a rotary-arm type as shown in Fig.1 was designed in the light of the results obtained in the previous works, and combustion tests on kerosene and heavy fuel oil were made with the apparatus as shown in Fig.6. The facts revealed from the tests are as follows : (1) The states of combustion are classified, as shown in Fig.7, as (a) one body flame, (b) doughnut type flame, (c) combustion on a furnace wall and (d) a combined type of (b) and (c). Among these (a) and (b) may be used in practical application. (2) The shape or hardness of the flame can be varied in considerably wide range by changing the quantity of excess air or the speed of rotation. (3) High combustion efficiency is obtainable especially in the range of excess air coefficient of λ=1.1∼1.5. The design procedure of the burner of this type.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ