Self-Crack-Healing Behavior of SiN<sub><font size="-1">x</font></sub>/SiC<sub><font size="-1">y</font></sub> Nano-Laminated Thin Film under High Temperature Environment
-
- NAKATANI Masanori
- Dept. Mech. Eng., Univ. of Hyogo
-
- NISHIMURA Junki
- Graduate Student, Univ. of Hyogo
-
- HANAKI Satoshi
- Dept. Mech. Eng., Univ. of Hyogo
-
- UCHIDA Hitoshi
- Dept. Mech. Eng., Univ. of Hyogo
Bibliographic Information
- Other Title
-
- 高温環境下におけるSiN<sub><font size="-1">x</font></sub>/SiC<sub><font size="-1">y</font></sub>ナノ積層薄膜の自己き裂治癒挙動
- 高温環境下におけるSiNx/SiCyナノ積層薄膜の自己き裂治癒挙動
- コウオン カンキョウ カ ニ オケル SiNx/SiCy ナノ セキソウ ハクマク ノ ジコ キレツ チユ キョドウ
- Self-Crack-Healing Behavior of SiNx/SiCy Nano-Laminated Thin Film under High Temperature Environment
Search this article
Abstract
A self-crack-healing behavior of SiNx/SiCy nano-laminated thin film under high temperature environment was investigated. The films were fabricated on silicon substrate by an ion beam assisted deposition. The thickness of the SiNx/SiCy nano-laminated film was 1μm and four layered film was deposited. To compare with the crack healing behavior of laminated film, SiNx and SiCy monolayer films were also fabricated. After the deposition, the pre-cracked samples were heated using an electric furnace in an air atmosphere at the temperature of 600°C to 1200°C. In the case of SiNx and SiCy monolayer films, the crack was poorly healed after heating at the temperature lower than 800°C. This was because the size of a crack opening increased after heating due to the release of residual stress. On the other hand, slight crack healing occurred for 24h at the temperature of 600°C. It was confirmed that Auger electron count for oxygen atom was high along the healed crack, indicating that the crack healing was achieved by oxidation reaction on crack plane. Crack healing improved with an increase in the heating temperature and time. Moreover, the crack healing finished for 72 and 24h at 600 and 800°C, respectively. From these results, we concluded that SiNx/SiCy nano-laminated film has a superior self-crack-healing ability. However, the heating over 1200°C caused oxidation of film overall and disappeared the laminate structure. From these results, it is suggested that an upper limitation of heating temperature exists for self-crack-healing of SiNx/SiCy nano-laminated thin film.
Journal
-
- Journal of the Society of Materials Science, Japan
-
Journal of the Society of Materials Science, Japan 62 (10), 634-639, 2013
The Society of Materials Science, Japan
- Tweet
Details 詳細情報について
-
- CRID
- 1390282680422138752
-
- NII Article ID
- 130003384095
-
- NII Book ID
- AN00096175
-
- COI
- 1:CAS:528:DC%2BC3sXhvFKqur3N
-
- ISSN
- 18807488
- 05145163
-
- NDL BIB ID
- 024945144
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- Abstract License Flag
- Disallowed
