Atomic Force Microscopy Cantilevers for Sensitive Lateral Force Detection.

DOI Web Site Web Site Web Site 被引用文献2件 参考文献16件
  • Kageshima Masami
    JRCAT–ATP,1–1–4 Higashi, Tsukuba, Ibaraki 305–0046, Japan
  • Ogiso Hisato
    JRCAT–NAIR, 1–1–4 Higashi, Tsukuba, Ibaraki 305–8562, Japan Mechanical Engineering Laboratory, 1–2 Namiki, Tsukuba, Ibaraki 305–8564, Japan
  • Nakano Shizuka
    Mechanical Engineering Laboratory, 1–2 Namiki, Tsukuba, Ibaraki 305–8564, Japan
  • Lantz Mark A.
    JRCAT–ATP,1–1–4 Higashi, Tsukuba, Ibaraki 305–0046, Japan
  • Tokumoto Hiroshi
    JRCAT–NAIR, 1–1–4 Higashi, Tsukuba, Ibaraki 305–8562, Japan

この論文をさがす

説明

In order to enhance the lateral force sensitivity of atomic force microscopy (AFM) to detect atomic or molecular scale interaction, two types of force sensors were fabricated by additional processing of commercial sensors with the help of focused ion beam (FIB) technology. In one type of cantilever, a hinge was fabricated in the middle of the commercial cantilever by FIB milling, resulting in the reduction of the lateral force constant from 1204 N/m to 118 N/m. For further enhancement of the lateral sensitivity without causing snap-in behavior, a novel force sensor was designed and fabricated through a combination of FIB milling and FIB deposition techniques. The lateral force constant was reduced, for example, from 3600 N/m to 20 N/m, and the measured lateral force resolution attained the order of 1 nN.

収録刊行物

被引用文献 (2)*注記

もっと見る

参考文献 (16)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ