Ａｌ‐Ｐｂ‐Ｃｕ焼結合金の諸性質

DOI Web Site

書誌事項

タイトル別名
  • Some properties of Al-Pb-Cu sintered alloys
  • Al Pb Cu ショウケツ ゴウキン ノ ショ セイシツ

この論文をさがす

抄録

The basic properties of sintered Al-10% Pb-1-6% Cu alloys such as dimensional change, sintered density, hardness and radial crushing strength were examined. The compacts expand during sintering at 540°to 610°C in the purified hydrogen atomsphere because of pore generation at the eutectic temperature of the Al-Cu system and formation of a liquid Pb phase. This expansion shall also be considered from the viewpoint of evolution and expansion of gases absorbed in the liquid phase. The suitable Cu content 4% and the optimum temperature and time for sintering respectively about 580°C and 2hr are recommended on the basis of the combination of basic properties of the alloys sintered under pressure 1ton/cm2.

収録刊行物

  • 軽金属

    軽金属 29 (10), 431-436, 1979

    一般社団法人 軽金属学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ