押出し成形法による焼結ステンレスパイプの製造

DOI Web Site 被引用文献1件

書誌事項

タイトル別名
  • Manufacturing of SUS316L Stainless Steel Tubes by Powder Extrusion Process
  • オシダシ セイケイホウ ニヨル ショウケツ ステンレス パイプ ノ セイゾウ

この論文をさがす

抄録

Long sintered tubes were made by extrusion process using SUS316L water-atomized powder.<br>Their characteristics for sintered filters were compared with those made by conventional pressing process.<br>Results were summarized as follows:<br>1) The density and the radial crushing strength are uniformly distributed in sintered filters made by extrusion while they become lower in the center of the longitudinal direction in the pressed one.<br>2) The filtration grade and the pressure loss are also uniformly distributed in the extruded filters while the former becomes higher and the latter lower in the center of the longitudinal direction in the pressed one.<br>3) The radial crushing strength of the extruded filters is higher than that of pressed one in the same filtration grade.

収録刊行物

  • 電気製鋼

    電気製鋼 52 (4), 247-253, 1981

    大同特殊鋼株式会社

被引用文献 (1)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ