書誌事項
- タイトル別名
-
- Tensile Properties of Cast Irons with Various Graphite Shapes in High Temperature Range.
- コクエン ケイジョウ ノ コトナル チュウテツ ノ コウオンイキ ニ オケル
この論文をさがす
説明
This study discusses the effects of the graphite shape and the temperature change on the tensile properties through static tensile tests conducted on three kinds of ferrite base cast iron in which the graphite shape is flake, vermicular and spheroidal (hereafter referred to as FC, CV and FCD, respectively). By reason that FCD was the most susceptible to the effects of temperature rise on the tensile strength, a steep lowering in the strength was observed in FCD after the temperature exceeded 723K. On the contrary, FC was the least influenced by those effects. The effects of temperature rise on elongation was found to be low in FC and CV, while FCD was extremely affected due to blue brittleness at around 673K. It was revealed that cast iron, unlike general steel materials, essentially presented a higher value in the elongation than the reduction of area. In the case of cast iron, it is therefore reasonable to use its elongation than the reduction of area as the index for representing the degree of ductility of the material.
収録刊行物
-
- 鋳造工学
-
鋳造工学 70 (9), 629-634, 1998
公益社団法人 日本鋳造工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681482902400
-
- NII論文ID
- 10002554158
-
- NII書誌ID
- AN10514770
-
- ISSN
- 21855374
- 13420429
-
- NDL書誌ID
- 4564962
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可
