測位と撮像の組み合わせに基づく道路舗装面の3次元計測方式の評価

書誌事項

タイトル別名
  • A Road Surface 3D Measurement Method Using Mobile Cameras and an Automatic Tracking Total Station

抄録

<p>Accurate measurement of the shape of road surfaces is essential in pavement work. Recently, mobile laser scanning (MLS) systems have been used to facilitate pavement measurement. MLS Systems require an automatic tracking total station (ATTS) and an inertial measurement unit (IMU) for localization. However, a sophisticated IMU is needed to achieve sufficient accuracy with MLS systems, and such an IMU increases the cost associated with the measurement process. In this report, we propose a novel road surface measurement method using mobile cameras and an ATTS. Our proposed method performs accurate estimation of camera poses using few ground control points, which enables low-cost photogrammetry-based measurements. As a result of our experiment, we confirmed that the proposed method can achieve sufficient accuracy for pavement management.</p>

収録刊行物

参考文献 (2)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ