書誌事項
- タイトル別名
-
- Implementation of automated control for hydraulic excavators based on 3D point cloud data
説明
<p>In this study, we propose an algorithm for planning the bucket edge trajectory to automate the operation of the backhoe to excavate the ground. In proposed algorithm, the shape of the ground before start excavating operation is obtained based on point cloud data using 3D LiDAR and used for trajectory planning. This trajectory planning takes into account that the bucket is easy to penetrate at the start of excavation, the soil has the target volume at the end of excavation, and the soil does not easily spill from the bucket after excavation. The proposed method was implemented on an actual backhoe and experimented in the test field of Public Works Research Institute. These are described in this paper.</p>
収録刊行物
-
- ロボティクス・メカトロニクス講演会講演概要集
-
ロボティクス・メカトロニクス講演会講演概要集 2022 (0), 1A1-E05-, 2022
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390294562484179712
-
- ISSN
- 24243124
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
-
- 抄録ライセンスフラグ
- 使用不可