ディンプルを有するシール型スラスト軸受におけるキャビテーション圧力の推定

DOI

書誌事項

タイトル別名
  • Estimations of Cavitation Pressures in Dimpled Seal-type Thrust Bearings

抄録

<p>This paper attempted to estimate the values of the cavitation pressures of seal-type thrust bearings with dimples of different diameters and depths, comparing experimental and analytical results. In the experiments, the oil film forces were measured for the various dimpled bearings with a fixed oil film thickness. The measured oil film forces were simulated by CFD analysis and the mass-conserving cavitation algorithm which implemented the JFO theory, using various cavitation pressures. In addition, cavitation pressures for a dimple were measured experimentally in various rotational speeds. As the results, the estimated cavitation pressures from the JFO analysis were slightly larger than those from CFD analysis. Cavitation pressure did not change much for the different dimple diameters, while it increased as the dimple depth increased. The measured cavitation pressure was generally consistent with the estimated results by CFD analysis, and it tended to increase gradually with increasing rotational speed.</p>

収録刊行物

  • 設計工学

    設計工学 59 (4), 169-182, 2024

    公益社団法人 日本設計工学会

キーワード

詳細情報 詳細情報について

  • CRID
    1390299705003839616
  • DOI
    10.14953/jjsde.2023.2992
  • ISSN
    21889023
    09192948
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ