海底探査掘削ロボットのための掘削トルク低減化を図る水噴射掘削手法の提案

DOI Web Site

書誌事項

タイトル別名
  • Water Jetting Excavation to Reduce Drilling Torque for Seabed Robotic Explorer

説明

<p>Marine resources exist on the seabed, and sampling is useful for a detailed study of these resources. In general, a pipe-shaped sampler is used to collect marine resources for investigation. However, this is inefficient for investigating sediments, which are widely distributed, because the sampling range is limited to the pipe penetration part. A wide area exploration can be made possible by deploying multiple robots to autonomously search beneath the seabed. In a previous study, we developed a seabed robotic explorer called "SEAVO" and experimentally demonstrated the ability of SEAVO to produce curved boreholes with a turning radius of 1.67 m, and a depth of 613 mm, in the land environment. However, underwater excavation has not been successful. Reduction in the drilling torque is necessary for underwater excavation. In this paper, we propose a water jetting excavation method to reduce the drilling torque.</p>

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ