パワースカイビング加工におけるZ-mapによる切り取り形状の解析

  • 小林 剛
    東京大学大学院工学系研究科機械工学専攻
  • 方 正隆
    東京大学大学院工学系研究科機械工学専攻
  • 任 宗偉
    東京大学大学院工学系研究科機械工学専攻
  • 木崎 通
    東京大学大学院工学系研究科機械工学専攻
  • 杉田 直彦
    東京大学大学院工学系研究科機械工学専攻
  • 西川 司
    株式会社 小松製作所 生産技術開発センタ
  • 久古 潤史
    株式会社 小松製作所 生産技術開発センタ
  • 名畑 英二
    株式会社 小松製作所 生産技術開発センタ

書誌事項

タイトル別名
  • Analysis of uncut chip shape in power skiving process by Z-map method

抄録

<p>Power skiving technology is a productive alternative for manufacturing internal gear to the shaping and hobbing processes. However, the complex geometrical relationship between skiving tool and workpiece complicates the generation of the chip formation which makes the research on chip shape is of interest to advance the understanding of skiving process. In this study, numerical analysis with Z-map method was proposed to construct cutting process of power skiving and followed by the experimental verification. As a result, the proposed method successfully obtained the shapes of uncut chips for each cutting pass and a good conformance between numerical and experimental investigations on cutting chips indicates the Z-map method based on numerical simulation is a suitable tool for advancing insight into power skiving process.</p>

収録刊行物

  • 年次大会

    年次大会 2018 (0), S1120105-, 2018

    一般社団法人 日本機械学会

詳細情報 詳細情報について

問題の指摘

ページトップへ