Real-time prediction of removal rate and friction coefficient during CMP using motor load currents of polisher
-
- TAKIGUCHI Shunsuke
- Graduate School of Kanazawa Institute of Technology
-
- OTA Shunpei
- Graduate School of Kanazawa Institute of Technology
-
- UNEDA Michio
- Kanazawa Institute of Technology
-
- YAMAMOTO Yuko
- Fujikoshi Machinery Corporation
-
- MIYASHITA Tadakazu
- Fujikoshi Machinery Corporation
-
- ISHIKAWA Ken-ichi
- Kanazawa Institute of Technology
Bibliographic Information
- Other Title
-
- 研磨装置のモータ負荷電流を用いた化学機械研磨における研磨レートと摩擦係数のリアルタイム同時予測
Abstract
<p>CMP process used to polish glass substrates for hard disk drives and sapphire substrates for LEDs is rarely automated, and the success or failure of this process is depended on the skilled technician. In this study, the prediction of the removal rate and friction coefficient was conducted using only the real-time data output from the motors on the polisher. Multiple regression analysis was performed using the acquired training data set with the motor load current as the objective variable and the removal rate and friction coefficient as explanatory variables. The results showed that the predicted removal rate was approximately 1 μm/h lower than the experimental value. Therefore, we performed multiple regression analysis again after compensating for mechanical characteristics by conducting a low pressure polishing test. Multiple regression analysis was also performed by changing from the slurry free introducing method to the circulation method. As a result, it was found that the compensation process can improve the prediction accuracy and it can be applied to monitoring system the consumable condition by real-time prediction.</p>
Journal
-
- The Proceedings of the Symposium on Evaluation and Diagnosis
-
The Proceedings of the Symposium on Evaluation and Diagnosis 2022.20 (0), 103-, 2022
The Japan Society of Mechanical Engineers
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390580063062118784
-
- ISSN
- 24243027
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- Crossref
-
- Abstract License Flag
- Disallowed