遊星歯車機構を用いたダクト清掃ロボットの 清掃率向上を目的とした清掃手法の検討

DOI Web Site 参考文献4件

書誌事項

タイトル別名
  • Investigation of a Cleaning Method to Improve the Cleaning Rate of a Duct Cleaning Robot using a Planetary Gear Mechanism
  • —Control Design based on Geometric Cleaning Trajectory—
  • —幾何学的な清掃軌跡に基づいた制御設計—

説明

<p>In this paper, a cleaning method is designed to improve the cleaning performance of a duct cleaning mechanism using a planetary gear mechanism. The objective of this study is to develop a self-propelled robot that can clean grease accumulated in kitchen ventilation ducts to reduce the risk of duct fires. In a previous study, a planetary gear cleaning mechanism and cleaning method were designed. In an grease cleaning experiment, the robot achieved its cleaning target of an average grease thickness of 0.1 mm or less. However, the non-uniformity of the brush bristle width prevented uniform cleaning of the entire inside of the pipe, and the remaining grease could ignite, resulting in a low risk reduction effect for duct fires. In this presentation, we propose a cleaning method that can clean the inside of ducts without gaps even when spiral brushes with non-uniform brush bristle widths are used, and describe the evaluation of the cleaning performance. As a result, the cleaning rate was improved by 25.4% compared to the conventional method, and the inside of the pipe was cleaned uniformly. Therefore, it is expected that duct cleaning using this mechanism will reduce the risk of duct fires. </p>

収録刊行物

参考文献 (4)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ