新しい磁気研磨法の開発

DOI
  • 鄒 艶華
    宇都宮大 工学部 工学研究科 精密加工研究室
  • 許 家也
    宇都宮大 工学部 工学研究科 精密加工研究室

書誌事項

タイトル別名
  • Development of a new Magnetic Abrasive Finishing Processing

抄録

<p>In order to improve the machining efficiency of the Magnetic Abrasive Finishing process, a new ultra-precision MAF process was developed. This new finishing process has a circulating system that uses a conveyor belt to renew the mixed abrasive particles. Because the number of abrasive particles involved in finishing process will not decrease, the machining efficiency will not decrease over time. An experimental device was designed and the experiment was completed. The sus304 stainless steel plate was used as the workpiece. The experimental result shows the feasibility of this finishing method, and the workpiece surface roughness can be improved from 273 nm Ra to 23 nm Ra. </p>

収録刊行物

詳細情報 詳細情報について

  • CRID
    1390852204638153728
  • NII論文ID
    130008084000
  • DOI
    10.11522/pscjspe.2021s.0_307
  • 本文言語コード
    en
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ