Pulsed Inductive Plasma Processing for Amorphous Thin Film Formation

DOI

Search this article

Description

<jats:title>ABSTRACT</jats:title><jats:p>A pulsed electromagnetic inductive discharge is used to prepare amorphous thin films. The pulsed plasma is generated by supplying pulsed current (maximum peak 70 kA, period 13 μs ) to a one-turn coil wound round a Pyrex glass tube. Amorphous silicon(a-Si) and amorphous carbon (a-C) films were deposited in mixture gas (20% SiH<jats:sub>4</jats:sub>, 80% Ar) and pure methane, respectively. The films formed on the subltrates set normal to the tube axis at a pressure of 10–200mTorr and a gas flow rate of 10–20 sccm. Deposition rate was about 1 nm per a single discharge shot. The deposited films of a few hundred nanometer thickness adhered well to room-temperature substrates. The a-Si films had optical gap of ˜ 1.7 eV. The a-C films were transparent in the IR range and had optical gap of 1.0 ˜ 2.0 eV. Relative spectral intensity measurement of the Balmer emission from hydrogen atoms showed that the electron temperature at the high electromagnetic compression phase is 1˜ 2 eV in silane discharges and 2˜5 eV in methane discharges.</jats:p>

Journal

  • MRS Proceedings

    MRS Proceedings 98 1987-01-01

    Springer Science and Business Media LLC

Details 詳細情報について

Report a problem

Back to top